The short answer
NEBULYTE 3D wall panels are black PVC tiles, 1 × 1 ft (1 square foot) each. They dampen noise, are easy to install and give a room a gamer look. Each panel covers 1 sq ft, so multiply your wall's width by its height in feet to get the panel count, then buy in packs of 10 or 20 to pay less per panel.
Specifications
| Spec | Value |
|---|---|
| Size | 1 × 1 ft per panel |
| Coverage | 1 sq ft per panel |
| Material | PVC |
| Colour | Black |
| Pack options | 1 piece, 10 pieces or 20 pieces |
| Good for | Gaming rooms, stream corners and bedroom walls |
Do 3D wall panels reduce noise?
The panels dampen noise in the room. The textured PVC surface gives sound something to break up against, so a covered wall is calmer than a bare one.
How many panels do you need?
Each panel covers 1 sq ft. Measure the wall in feet, multiply width by height, and add a few spare panels for cuts and mistakes.
| Wall | Size | Panels | Suggested packs |
|---|---|---|---|
| Behind a monitor | 4 × 3 ft | 12 | One pack of 10 and 2 single panels |
| Behind a desk | 6 × 4 ft | 24 | One pack of 20 and 4 single panels |
| Feature wall | 10 × 8 ft | 80 | Four packs of 20 |
Not sure of your count? Send us the wall size on WhatsApp (076 117 8055) and we will work it out with you.
How to install 3D wall panels
- Measure the wall and work out the panel count: width in feet × height in feet.
- Clean and dry the wall. Remove dust, grease and any loose paint so the adhesive can hold.
- Lay the panels out without fixing them to plan where cuts will fall. Keep cut panels to the edges and corners, not the middle.
- Start at a bottom corner and use a spirit level on the first panel so every row stays straight.
- Fix each panel with an adhesive that suits PVC and your wall. The install video on the product page shows panels being fixed with adhesive and pressed onto a wall.
- Press each panel firmly and line up its pattern with its neighbours before moving on. Wipe off any adhesive that squeezes out.
- Switch the power off at the mains before you work around sockets and switches.
Ask us on WhatsApp (076 117 8055) which adhesive suits your wall before you start.
Pair them with neon lighting
A black textured wall makes colour stand out. Run an RGB Neon LED Strip along the top edge or the desk line and the panels catch the light across their angled surfaces.
Pack options and prices
| Product | Price |
|---|---|
| 3D Wall Panels, 1 Piece | Rs. 390 |
| 3D Wall Panels, 10 PiecesRs. 370 each | Rs. 3,700Rs. 3,900 |
| 3D Wall Panels, 20 PiecesRs. 360 each | Rs. 7,200Rs. 7,800 |
